Home>Ballistic Steels>toughness improvement in hot rolled hsla steel plates

    toughness improvement in hot rolled hsla steel plates

  • Type:
    Ballistic Steels
  • Description:
    Toughness improvement in hot rolled HSLA steel platesFeb 11, 2015 Asymmetric hot rolling and conventional hot rolling were applied to a HSLA steel in order to improve the impact toughness of thick-gauge hot rolled plates. The asymmetric rolling condition was introduced by applying mismatched roll diameters. The diameter ...
  • Get Price [email protected]

-

relation between the rolling temperature and notch toughness. When thinner plates are normally hot-rolled, the reductions are extended to lower temperatures, and so the finish-rolling temperatures are also reduced. With reducing plate thickness, the a grains become finer and the yield strength and toughness are further improved.< 2 UevuT 2 T, HSLA Steels'95The Structural Integrity of High Strength Low Alloy (HSLA)Steels (150) S.E.Webster Effect of Niobium on Static Recrystallization of Hot-Deformed Austenitic HSLA Steel Analogue Alloy (157) A. A. Zadeh and D. Dunne Theoretical Models for Grain Size Refining During Dynamic Recovery and Dynamic Recrystallization of HSLA Steels (163)

Learn More

<452DBCF6AAEE2DA4BBAED5A15DC2E0504446C0C9A5CEAABAA15E2E696

temperature toughness and weldability that are best used in steel pipe pile for bridge, underwater tunnel, coastal wall, breakwaters. The maximum ordering thickness is 25mm. ASTM A572 GR.50 TYPE1 This grade of high strength low-alloy hot-rolled steel is applicable to structural use that is best used in sections and stiffening plates. CSC HC 1085(PDF) Hot Rolled HSLA Strip Steels for Automotive andHigh strength low alloy (HSLA) steels offer the advantage of weight and cost savings compared to mild steel. Therefore they are widely used in the automotive and the construction industry.AIST - Digital LibraryDriving Business Value in Industry 4.0 Big Data and Analytics for the Improvement of Steel Processes. Effect of Allotriomorphic Ferrite Thickness on Advanced High-Strength Steel Toughness. Effect of Bubble Behavior for a Stopper Rod With Multiple Side-Channel Injection on Bubble Size Distributions in Nozzle and Mold During Continuous Casting

Learn More

AN/onglets/Fetmet/ Page 7 STEEL PLATES - PK Metal

ASTM A 36 steel is a widely accepted general purpose structural quality steel offering a constant 36 ksi min. yield point for all thick-nesses of material. It is widely used in the construction of build-ings, bridges and other structures by means of welding, bolting or riveting. This steel is useful because of its wide availability. NOTCH TOUGHNESSASTM International - Journal of Testing and EvaluationFatigue Behavior of a Cold-Rolled SAE Grade 945X HSLA Steel. Stress Intensity Factors for Side-Grooved Fracture Specimens. Plastic Strain Ratio for Sheet Metal Effect of Gage Length and Width Measurement Locations Using Reduced Section Specimens. Estimation of Characteristic Values of Fracture ToughnessAlloys & Specialty Metals with Value Added - 4340 SteelSteel Fence Posts and Assemblies, Hot Wrought A739 Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both A829 Alloy Structural Steel Plates A914 / A914M Steel Bars Subject to Restricted End-Quench Hardenability Requirements A920 / A920M Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical

Learn More

Behind the Development of Advanced High Strength Steel

Safety is paramount importance along with enhancing fuel efficiency of the transport car over the last three decades. Advanced high strength steels play a pivotal role towards achieving the desired structural characteristics of the motor vehicles. Many structural components have been replaced by advanced high strength steels like IF steel, Bake hardening steel, HSLA steel, Micro alloyed steelBlog High Quality Metal and Alloy Supplier Avion AlloysThis type of steel has a higher level of toughness and responds better to heat treatment than other types of steel. HSLA steel has an increased ability to resist corrosion. The Manufacturing Process. HSLA steel is produced by mixing coal and iron ore in a furnace hot enough to melt these elements.Cited by 15Toughness improvement in hot rolled HSLA steel platesChen et al. [14] reported the toughness improvement in a hot rolled HSLA steel plate using ASHR method. Liu and Kawalla [15] investigated the grain refinement effect caused by ASHR process for

Learn More

City Research Online

composition mayresultin competitive hot rolled steels which can replace the controlrolled steels at the lower strength end of the controlrolled strength spectrum, (350-400MPa).Currently, research work has focused on aluminiumas an additionto play the major rolein improving the impact behaviour of hot rolled HSLA (high strength low alloy) steels.Comparison of the Mechanical Properties of Steel andLow alloy steel types include High strength low alloy steel (HSLA), a group of low to medium carbon steels that use a low amount of alloying elements to increase yield instead of raising the carbon content to achieve yield strengths above 50ksi. High temperature steels Copper in Steels IspatGuruSep 14, 2014 Copper in high strength low alloy (HSLA) steels. The advantages of standard HSLA steel is that it is having good combination of strength, toughness, and weldability and can be produced at a very reasonable cost. A number of HSLA steels have been developed which depend upon Cu to meet their specified properties.

Learn More

Development of alternative as-rolled alloys to replace

veried here that the total strain applied during hot rolling and the nishing temperature were essential to improve the toughness of both alloys; the effect of the former parameter revealed to be more important. The aged HSLA-80 steel showed greater values of yield strength, but lower toughness than the as-rolled ULCB alloy.Effect of Cu Addition in Pipeline Steels on MicrostructureIt can also be observed that the hot-rolled Cu-modified steels showed lower yield strength compared to the X80 steel. There may be two reasons for this phenomenon. (a) Hot-rolled Cu-modified steels have lower C (1.5 and 2.0Cu steels) and Mn contents compared to the X80 steel, which are two major strengthening elements in these steels.Effect of Hot Deformation and Controlled Cooling ProcessFor hot-rolled HSLA steel plates, the possibility and degree of as-rolled microstructure refinement by the aid of oxide inclusions are not known clearly. With this purpose, in this paper, we have studied the influence of inclusions on microstructure in steel base metal under thermo-mechanical conditions.

Learn More

Effects of Thermo-mechanical Process Parameters on

A novel low-carbon micro-alloyed steel has been developed with ultrahigh strength (UTS ~ 1700 MPa), satisfactory ductility (total elongation ~ 13%) and impact toughness (25 J/cm2 at 40 °C) for light-weight applications in automobile, aerospace and defence sectors. The effect of finish rolling temperatures (850750 °C) and cooling rate (air cooling versus water quenching) on theEffects of Widmanstätten ferrite on the mechanicalLaboratory melted and rolled C-Mn steel plates were austenitized at either 925 °C or 1150 °C to produce nominal austenite grain sizes of 60 and 200 µm, resspectively. The plates were then cooled at rates in the range of about 2 °C/min to 400 °C/min to produce mixed polygonal ferrite/Widmanstätten ferrite/pearlite microstructures. The percentage of WidmanstÄtten structure (aEffects of Widmanstaetten ferrite on the mechanical@article{osti_7277862, title = {Effects of Widmanstaetten ferrite on the mechanical properties of a 0. 2 pct C-0. 7 pct Mn steel}, author = {Bodnar, R L and Hansen, S S}, abstractNote = {Laboratory melted and rolled C-Mn steel plates were austenitized at either 925 C or 1,150 C to produce nominal austenite grain sizes of 60 and 200 [mu]m, respectively.

Learn More

Emanuelle Reis, M.Sc. - Rolling Specialist Engineer in the

The main physical metallurgy processes controlling final mechanical properties in as hot rolled steel products are basically recrystalization, grain growth, precipitation and austenite to ferriteEvaluation of Microstructure and Mechanical Properties of1. Introduction. High strength low alloys steels (HSLA) have been used for the production of pipes for more than 30 years. However, the alloy design of pipeline grades is being continuously modified and the process technology optimized because of increasing demand of high strength-toughness combination requirement of pipeline steels 1-11.This demand is related to the increase of oil and gasEvaluation of Microstructure and Mechanical Properties of1. Introduction. High strength low alloys steels (HSLA) have been used for the production of pipes for more than 30 years. However, the alloy design of pipeline grades is being continuously modified and the process technology optimized because of increasing demand of high strength-toughness combination requirement of pipeline steels 1-11.This demand is related to the increase of oil and gas

Learn More

Fiber Laser Welding of Direct-Quenched Ultrahigh Strength

Sep 09, 2015 Improvement of the Strength of Welded Joints in Ultra High Strength Optim 960 QC Using Autogenous Yb:YAG Laser Welding of Weld Thermal Cycle on Microstructure and Fracture Toughness of Simulated Heat-Affected Zone for a 800 MPa Grade High Strength Low Alloy Steel, Hot-Rolled Steel Sheets Plates and Coils, Rautaruukki Corporation,Figure 1 - Processes for Producing Plate SteelsThin HSLA-65 The final specification for HSLA-65 was developed as a commercial specification as ASTM A945(3). The chemistry for plates to 1-1/4 (32 mm) is shown in Figure 3. A Ti addition was made to improve weldment toughness properties. Although the specificationFlash-Butt Welding of High Strength Steels - Nippon Steelthe weld toughness deteriorates much faster than the base metal toughness5,6), hence improving the weld toughness is necessary. In recent years, more and more steel products having higher strength are used in every sector of industry. With the continual increase in strength of steel

Learn More

Formable high strength low alloy steel sheet - Bethlehem

Nov 15, 1983 R. R. Pradhan, "Effect of Sulfur on Forming Properties of Hot Rolled HSLA Sheet Steel," Proceedings of the 21st Mechanical Working and Steel Processing Conference, Oct. 25, 1979, Cleveland, Ohio, has shown that in an 80 ksi HSLA steel, the anisotropy in bend properties can be practically eliminated if S in the form of manganese sulfides isGB/T 1591 Q390C hot rolled HSLA steel plates - BEBON steelIn GB/T 1591 Q390C hot rolled HSLA steel plates, the steel grade Q390C is composed of three parts, namely, the Chinese phonetic alphabet, the yield strength value and the quality grade symbol, which represent the yield strength, for example, Q represents the steel yield strength "Qu" Chinese phonetic alphabet first letter; 390 is yield strength value, unit MPa; C is quality grade, which isGalvanized galvanized steel sheet in coil / Cold RolledRely on Steel Warehouse to provide quality Cold Rolled Steel Sheets & Coils at competitive prices. Browse through our selection today & request a free quote. Cold-rolled steel is low-carbon hot-rolled steel that has been cleaned of oxide scale and then finished in a specific series of rolling

Learn More

HIGH-STRENGTH LOW-ALLOY (HSLA) STEELS

steel can be attained. Nowadays, also micro-alloyed cast steels have found many applications in the manufacturing of industrial parts that used to be produced by more expensive manufacturing processes. Keywords high-strength low-alloy (HSLA) steels, micro-alloying elements, carbides, nitrides, carbonitrides, mechanical propertiesHSLA Steels '2000Problems of Welding High-Strength Low-Alloy Steels I.K. Pokhodnya (Ukraine) 105 ' 2 Physical Metallurgy and Properties 2.1 Phase Transformation and Recrystallization Effect of Niobium Additions on the Formation of Retained Austenite in Hot Rolled TRIP Steel H. Takechi (Japan) 113HSLA Steels 2015, Microalloying 2015 & OffshoreThe papers focus on the exchange of the latest scientific and technological progresses on HSLA steels, microalloying steels, and offshore engineering steels over the past decades. The contributions are intended to strengthen cooperation between universities and research institutes, and iron and steel companies and users, and promote the further

Learn More

HSLA Steels 2015, Microalloying 2015 & Offshore

This DVD contains a collection of more than 150 manuscripts presented at the joint conference of the 7th International Conference on High Strength Low Alloy Steels (HSLA Steels 2015), the International Conference on Microalloying 2015 (Microalloying 2015), and the International Conference on Offshore Engineering Steels 2015 (OES 2015), which was co-organized by The Chinese Society for MetalsHardox 450 - The most popular structural wear plate - SSABThe most popular abrasion-resistant steel with excellent structural properties. Hardox® 450 is an abrasion-resistant steel with a nominal hardness of 450 HBW. Hardox® 450 combines good bendability and weldability with an option for guaranteed impact toughness (Hardox® 450 Tuf).Hardox 450 - The most popular structural wear plate - SSABThe most popular abrasion-resistant steel with excellent structural properties. Hardox® 450 is an abrasion-resistant steel with a nominal hardness of 450 HBW. Hardox® 450 combines good bendability and weldability with an option for guaranteed impact toughness (Hardox® 450 Tuf).

Learn More

Hardox 450 - The most popular structural wear plate - SSAB

The most popular abrasion-resistant steel with excellent structural properties. Hardox® 450 is an abrasion-resistant steel with a nominal hardness of 450 HBW. Hardox® 450 combines good bendability and weldability with an option for guaranteed impact toughness (Hardox® 450 Tuf).High Performance Steelsapplied for steel bridges, is the Thermo-Mechanical Control Process (TMCP). TMCP adequately controls reheating and rolling, and cooling after rolling in steel plate production. The TMCP tech-nology imparts better weldability, higher strength, excellent toughness and improved properties to steel platesHigh Strength Carbon and Low Alloy Steels IspatGuruMar 31, 2016 High Strength Carbon and Low Alloy Steels. satyendra; March 31, 2016; 0 Comments ; cold rolled, drawability, hot rolled, HSLA steels, low ally steels, Micro alloying, precipitate hardening, solid solution strengthening, tensile strength, Yield strength,; High Strength Carbon and Low Alloy Steels. High strength carbon (C) and low alloy steels have yield strength (YS) greater than 275 N/sq mm

Learn More

Impact Resistance and Fracture Toughness of Vanadium

Impact resistance and fracture toughness of vanadium-based MA forging steel, which is the most commonly produced MA steel, are investigated in this study. To compare the behavior with the Q&T steel, both the as-forged and the Q&T conditions are evaluated.Influence of V and Nb MicroAlloying on Direct QuenchedAfter solutionannealing of 15 min at 1220 °C, the steels were rolled in a hotrolling simulation unit in nine passes with a tot = 2.3 from 55 to 6 mm thick plates with a length of 2.000 mm. Each alloy was rolled with two different rolling schemes in order to achieve two different FRT of 1) 850 °C and 2) 930 °C.International Journal of Solids and Structures1990; Sawhill, 1990). In this study, HSLA-100 is used as the refer-encesteel alloy in examining performance improvement.This mar-tensitic steel has similar strength (a yield stress of 100 ksi or 689 MPa) and toughness to the alloy it replaced HY-100. HSLA-100 was designed with reduced carbon content in order to make

Learn More

Klaus Hulka Scientific.Net

This paper investigates the development of hot rolled structural plate steels through laboratory hot rolling simulations of thermo-mechanically controlled processes (TMCP). Specific alloying and microalloying along with an optimised TMCP process has allowed high tensile properties to be achieved in combination with high levels of toughness.Liviu Gurau Support Manager Quality & ProductsResponsible for reengineering process and cost reduction projects in heavy plates ( pressure vessels , shipbuilding , pipeline ) ; hot rolled coils ( gas bottles , deep drawing , HSLA automotive , mechanical pipe , energy pipe ) ; cold rolled coils ( enameling steel , automotive HSLA steel , strap steel , deep drawing steel).Materials Science Forum Vols. 500-501 p. 7 Scientific.NetConsequently, a semi-industrial trial, involving the manufacture of a steel containing 0.07%V, rolled to 22 mm and 32 mm thick, narrow plates, was carried out. This demonstrated that after finish rolling at 750oC, followed by air cooling, the steel had a yield strength in excess of 470 MPa accompanied by excellent toughness.

Learn More

Mechanical properties of ausforged 27MnSiVS6 microalloyed

Hot forging of microalloyed steels, also known as high strength low alloy steels (HSLA), has a wide application for manufacturing automotive components. The purpose of this study was to evaluate the microstructure and the mechanical strength and toughness of the 27MnSiVS6 microalloyed steel, when formed by ausforging, to analyze the processMencinger's WebHot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability A 678/A 678 M Quenched and Tempered Carbon Steel Plates for Structural Applications A 690/A 690 M High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments A 699Metals Special Issue Advances in Microalloyed SteelsSteels used for high-speed train wheels require a combination of high strength, toughness, and wear resistance. In 0.54% C-0.9% Si wheel steel, the addition of 0.075 or 0.12 wt % V can refine grains and increase the ferrite content and toughness, although the influence on the microstructure and toughness is complex and poorly understood.

Learn More

Metals Special Issue Advances in Microalloyed Steels

Steels used for high-speed train wheels require a combination of high strength, toughness, and wear resistance. In 0.54% C-0.9% Si wheel steel, the addition of 0.075 or 0.12 wt % V can refine grains and increase the ferrite content and toughness, although the influence on the microstructure and toughness is complex and poorly understood.Metals Special Issue High-Strength Low-Alloy SteelsHigh-strength low-alloy steels are designed to provide specific desirable combinations of properties, such as strength, toughness, formability, weldability, and corrosion resistance. produced by different continuous casting processes are investigated to elucidate their effect on segregated bands in hot-rolled section steel. and niobiumNitrogen in Steels Part One : Total Materia ArticleIn general, however, most steel products require that nitrogen be kept to a minimum. High nitrogen content may result in inconsistent mechanical properties in hot-rolled products, embrittlement of the heat affected zone (HAZ) of welded steels, and poor cold formability.

Learn More

Plate Steel, Sheet Steel & Aluminum Sheets Owen Industries

ASTM A572 GR50 A572 is a high strength, low alloy steel that offers a greater strength than plain carbon steel plates, plus ductility, weldability, formability, toughness and fatigue strength. A572 meets a minimum strength requirement (dependent on grade) and Proceedings of the 10th International Conference on SteelManufacture of Economical As-hot-rolled Dual Phase Steel in WISCO CSP Plant Real-time assessment of Coil QualityExperience from Implementation at Hot Strip Mill Production of Extra-Deep Drawing Cold Rolled IF Sheet Steel Micro-alloyed with Ti in ASP LineProgress in thermomechanical control of steel plates quenching on hot-rolled plates was introduced in 1956 in Japan [1, 15]. Since then, there has been massive commercial production of steel plates with tensile strength rated between 600 and 800MPa. This online quenching procedure for hot-rolled plates involves their directly quenching into water in a tank; it is the prototype of present-day TMCP

Learn More

Progress in thermomechanical control of steel plates and

Apr 03, 2012 Since then, there has been massive commercial production of steel plates with tensile strength rated between 600 and 800 MPa. This online quenching procedure for hot-rolled plates involves their directly quenching into water in a tank; it is the prototype of present-day TMCP in that it may result in enhanced strength, toughness and weldability.Progress in thermomechanical control of steel plates andApr 03, 2012 Since then, there has been massive commercial production of steel plates with tensile strength rated between 600 and 800 MPa. This online quenching procedure for hot-rolled plates involves their directly quenching into water in a tank; it is the prototype of present-day TMCP in that it may result in enhanced strength, toughness and weldability.Progress in thermomechanical control of steel plates andquenching on hot-rolled plates was introduced in 1956 in Japan [1, 15]. Since then, there has been massive commercial production of steel plates with tensile strength rated between 600 and 800MPa. This online quenching procedure for hot-rolled plates involves their directly quenching into water in a tank; it is the prototype of present-day TMCP

Learn More

Quenched And Tempered Steel Plates Supplier, Stockist in

Regular training is provided in the direction of our associates in order to stay the improvement program on the path for future growth and success inside our company. quend 700 structural steel plates properties, en-10025-2 s690ql plates chemical composition, quenched & tempered steel hot rolled plate stockists in india, en-10025-6 platesQuenched and Tempered Low-Alloy Steel : Total Materia Some producers use nitrogen additions to assist in the precipitation strengthening of controlled-cooled sheet and plate with thicknesses above 9.5 mm. In one case, hot-rolled plates with vanadium and 0.018 to 0.022% N have been produced by controlled cooling in thicknesses up Quenched and Tempered Low-Alloy Steelconventionally hot-rolled vanadium steels with 0.25% C and 0.08% V is about 450 MPa. The practical limit of yield strengths for hot-rolled vanadium-microalloyed steel is about 415 MPa. Niobium Microalloyed Steels. Like vanadium, niobium increases yield strength by precipitation hardening; the magnitude of the increase depends on the size and amount

Learn More

Quenched and Tempered Low-Alloy Steel

conventionally hot-rolled vanadium steels with 0.25% C and 0.08% V is about 450 MPa. The practical limit of yield strengths for hot-rolled vanadium-microalloyed steel is about 415 MPa. Niobium Microalloyed Steels. Like vanadium, niobium increases yield strength by precipitation hardening; the magnitude of the increase depends on the size and amountReview Development of Steel Plates by Intensive Use oftechnology for improvement of strength and toughness by providing hot or warm working during the processing of heat treatment, and thus, its application was restricted to heat treated steels. On the other hand, TMP aims to improve various properties in hot rolled steel products through the optimization of microstructure due to the strict and inge-SSAB Domex structural steel sheet, plates and tubes - SSABSSAB Domex® is a wide range of versatile structural steels that deliver excellent cold forming, machining and welding performance. SSAB Domex® grades undergo inspection at several points during production to ensure they comply with our rigorous quality requirements for mechanical properties and dimensions.

Learn More

Steel Bridge Design Handbook - Bridge Steels and Pages

The endresult is that continuous casting results in more uniform steel products and improves the cost-effectiveness of steel making.3.1.3 RollingThe cast slabs must be reheated and passed back and forth through a series of rollers to form theslabs into the final sizes of structural plates or shapes. Traditional hot-rolled products are heatedSteel Bridge Design Handbook - Bridge Steels and PagesThe endresult is that continuous casting results in more uniform steel products and improves the cost-effectiveness of steel making.3.1.3 RollingThe cast slabs must be reheated and passed back and forth through a series of rollers to form theslabs into the final sizes of structural plates or shapes. Traditional hot-rolled products are heatedSteel Strength Products & Suppliers Engineering360Carbon Steels and Alloy Steels - Hot Rolled Sheet -- High Strength Low-Alloy Steel. Supplier Arcelor Mittal USA use link plates that, in most cases, are equal in thickness to the plates used in the next larger size of SKF Xtra Strength improvement of steel strength and toughness

Learn More

Steel Strength Products & Suppliers Engineering360

Carbon Steels and Alloy Steels - Hot Rolled Sheet -- High Strength Low-Alloy Steel. Supplier Arcelor Mittal USA use link plates that, in most cases, are equal in thickness to the plates used in the next larger size of SKF Xtra Strength improvement of steel strength and toughness THE ROLE OF NIOBIUM IN LOW CARBON BAINITIC HSLA High strength low alloy (HSLA) steel has been defined as a material where the properties (strength, fracture toughness, formability and weldability) are balanced in such a way, that the reliability and overall costs are optimized [1]. Thus, their strength is considered high only compared to mild steelTMCP STEEL PLATE1. Improvement in Efficiency of Fabrication and Its Reliability 2. Superior Strength and Toughness 4. TMCP Steel is online-heat treated and low-alloyed metal 3. Short Lead Times SM570TMC S460M S355JO Thickness(mm) Min.Yield Strength(N/ mm 2) SM490 500 450 400 350 300 250 0 20 40 60 80 100 120 TMCP Steel As-rolled Steel Advantage of TMCP Steel

Learn More

The Complete Technology Book On Hot Rolling Of Steel by

[h3]High-strength Low-alloy (Hsla) Steels[/h3] [p]Once referred to as high-tensile steels or low-alloy steels, high-strength low-alloy steels exhibit yield points in excess of 40,000 psi. They contain small amounts of alloying elements and achieve their strength in the hot-rolled or normalized conditions.The Complete Technology Book on Hot Rolling of SteelHigh-strength Low-alloy (Hsla) Steels. Once referred to as high-tensile steels or low-alloy steels, high-strength low-alloy steels exhibit yield points in excess of 40,000 psi. They contain small amounts of alloying elements and achieve their strength in the hot-rolled or normalized conditions.The Gauge Glossary - RyersonBands - The initial coil product produced by rolling a slab on a hot strip mill, generally to thickness ½ and lighter. It is usually further processed as follows 1. Rerolled into cold rolled sheets. 2. Leveled and cut into plates (3/16 and over). 3. Leveled and cut into hot rolled flat sheets (lighter than 3/16).

Learn More

The effect of grain renement on the mechanical

Fe-C-Mn-Nb slab of steel to a controlled hot rolling schedule using different rolling strain rates followed by spray cooling on hot rolled plate in function of the resulting microstructure, grain size renement and mechanical properties. 2. Experimental procedures The composition of the steel The main use of HARDOX500 wear-resistant steel plate steelJISG4304/4312 SUS304 stainless steel plates and sheets; EN 10208-2 L 290MB; DIN 17155 17Mn4; SAE1010; GB/T 1591 Q460E hot rolled HSLA steel plates; DIN 17172 StE 360.7; QStE600TM; API 5CT K55 casing pipe; UNI 5867 FeP 11; W St E 355; A St 45; DIN 17200 C50; NFA36-201 E420R; DIN 17155 13CrMo 4 4; DIN17102 TStE380 1.8910 structure steel platesTitle Support Manager Quality & AIST - Digital LibrarySuper Flatness Analysis And Control System For Cold-Rolled Wide Strip Steel. Superior Formability And Impact Toughness Of Hot Rolled Nb-Ti Microalloyed Steels In Relation To V-Cb Microalloyed Steels. Synchronous Learning Algorithm With Gain Scheduling Fo

Learn More

Toughness improvement in hot rolled HSLA steel plates

Feb 11, 2015 Asymmetric hot rolling and conventional hot rolling were applied to a HSLA steel in order to improve the impact toughness of thick-gauge hot rolled plates. The asymmetric rolling condition was introduced by applying mismatched roll diameters. The diameter ratio Types of steels in useFeb 25, 2017 Types of steels in use 1. Carbon is an effective, cheap, hardening element for iron and hence a large tonnage of commercial steels contains very little alloying element. They may be divided conveniently into low-carbon (<0.3% C), medium-carbon (0.30.7% C) and High carbon (0.71.7% C).US Patent for High strength low alloy steel Patent (PatentA high strength low alloy steel having a yield strength of at least 100 ksi and a Charpy V-notch impact strength of at least 35 ft-lbs. at minus 84.degree. C. (minus 120.degree. F.) at thickness of up to 6 inches is provided wherein the steel consists essentially of an effective amount up to 0.036% carbon, for low temperature toughness up to 5% manganese, up to 1% silicon, up to 0.015% sulfur

Learn More

US9920391B2 - High-strength hot-rolled steel strip or

A high-strength hot-rolled steel strip or sheet with tensile strength of 570 to 870 MPa and an excellent combination of total elongation, stretch-flange formability, as well as fatigue resistance and to a method of manufacturing the steel strip or sheet and a chassis part made thereof.Ultrahigh Charpy impact toughness (~450J) achieved in highFeb 02, 2017 In order to reveal the toughness of our designed steel, standard Charpy V-notch impact samples were prepared. Ultrahigh Charpy V-notch toughness of 300450J was achieved with strength as high as 0.81.2 GPa (seeing Supplementary Tables S2-S3).Such ultrahigh toughness is much excellent than those high toughness steels, such as pipeline steels and high strength low alloy WO2014141632A1 - Thick steel sheet having excellent ctodProvided are a thick steel sheet having excellent CTOD properties in low-medium heat input multilayer welded joints, and a manufacturing method for the thick steel sheet. The component composition of the steel sheet includes, in mass%, 0.03-0.10% of C, at most 0.5% of Si, 1.0-2.0% of Mn, at most 0.015% of P, 0.0005-0.0050% of S, 0.005-0.060% of Al, 0.5-2.0% of Ni, 0.005-0.030% of Ti, 0.0015-0

Learn More

WO2014141632A1 - Thick steel sheet having excellent ctod

Provided are a thick steel sheet having excellent CTOD properties in low-medium heat input multilayer welded joints, and a manufacturing method for the thick steel sheet. The component composition of the steel sheet includes, in mass%, 0.03-0.10% of C, at most 0.5% of Si, 1.0-2.0% of Mn, at most 0.015% of P, 0.0005-0.0050% of S, 0.005-0.060% of Al, 0.5-2.0% of Ni, 0.005-0.030% of Ti, 0.0015-0Weathering steel - SteelConstructionfoWeathering steel is a high strength low alloy steel that was originally developed by United States Steel in the 1930s to resist corrosion and abrasion in their ore wagons. It was given the trade name Cor-ten, and was first used in construction on the John Deere World Headquarters building in Moline, Illinois, which opened in 1964.What Is Weathering Steel? Metal Supermarkets - SteelOct 05, 2017 Our hot rolled and cold rolled steel is available in a wide range of shapes including bars, tubes, sheets and plates. We can cut metal to your exact specifications. Visit one of our 80+ locations in North America today.

Learn More

Why Hardox 550 beats manganese steel in wearparts - SSAB

And third, a homogenous microstructure together with a low level of impurities (inclusions, residuals and segregations) boosts its toughness. First-class workshop performance. Hardox 550 boasts workshop qualities equivalent to wear plates at 500 HBW. You can weld it and machine it with the same machines you use for ordinary 500 HBW plates.cold rolled low price carbon steel sheetDifference Between Hot and Cold Rolled Steel Metal Sep 11, 2014 · Customers often ask us about the differences between hot rolled steel and cold rolled steel.There are some fundamental differences between these two types of metal.The differences between hot rolled steel and cold rolled steel relates to the way these metals are processed at the mill, and not the product specification or grade.

Learn More

Technical Parameters

Inspection & Control

we have a comprehensive set of inspection and control tools for quality control, materials analysis, mechanical properties,ultrasonic testing, magnetic particle inspection, etc..

universal tester

universal tester

Impact test

Impact test

The bevel gear contact area inspection

Real Test

Bevel Gear Contact Area (Convex)

AK47 Real Test

Three-coordinate bevel gear precision inspection report

Our Services

To ensure better cooperation,our factory provides the following services to the buyers:

1. OEM&ODM:As the special samples and drawings.

2. The small order is acceptable.

3. Professional services

4. Comprehensive and professional after-sale services

We are a supplier of bulletproof steel material & machinery products. We have extensive experience in the manufacture of bulletproof steel plate, other Bulletproof peripheral products. Welcome to sending drawings and inquiry.

Production Workflow

OEM

According to the drawings or samples, customize steel products you need.

More

ODM

According to the specific requirements, design steel products for you, and generate the production.

More